0
£42.95 (ex.VAT)
Low odour, ultra-high definition printing resin for use in printers with a wavelength of 405nm. Designed for the fast and accurate printing of all dental models including crown and bridge. The resin is hard but offers a smooth finish.
XY RESOLUTION: 0.030mm Z RESOLUTION: 0.030mm
1kg
| Basic Info | |
| Layer Height (mm) | 0.03 – 0.1 |
| Optimal | 0.05 |
| Retract Speed (mm/min) | 150 |
| Transition Type | Linear |
| Waiting Mode | Light |
| Bottom Layers | |
| Layer Count | 6 |
| Exposure Time (s) | 30-40 |
| Lifting Distance (mm) | 8 |
| Lifting Speed (mm/min) | 60 |
| Light-off Delay (s) | 13 |
| Bottom Retract Distance (mm) | 8 |
| Bottom Retract Speed (mm/min) | 150 |
| Transition Layers | |
| Layer Count | 6 |
| Normal Layers | |
| Exposure Time (s) | 2-2.5 |
| Lifting Distance (mm) | 8 |
| Lifting Speed (mm/min) | 60 |
| Light-off Delay (s) | 13 |
| Exposure Time (s) | 20 |
| Retract Distance (mm) | 8 |
.
Struggling to find the products you’re looking for? Maybe you know them by a different name? We’re always open to suggestions so if you’d like to add another terminology to this product to make it easier to search for next time, please click here and let us know!
WHW Plastics Ltd, Therm Road,
Hull, East Yorkshire, HU8 7BF
All prices are ex.VAT & delivery and are subject to change - standard terms and conditions apply.
© 2024 WHW Plastics Ltd. All rights reserved.
